I just edited Gary Becker's profile, because I was getting the suspicion that those who amend their profile yet did not touch their affiliations get default share attributed. Well, I could not verify that, because his new template says: Workplace-Name: Workplace-Share: Workplace-Name: Workplace-Share: First time I see this in my verifications. -- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
I have already noticed this and i'm working on it. -i On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I just edited Gary Becker's profile, because I was getting the suspicion that those who amend their profile yet did not touch their affiliations get default share attributed. Well, I could not verify that, because his new template says:
Workplace-Name: Workplace-Share: Workplace-Name: Workplace-Share:
First time I see this in my verifications.
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
______________________________**_________________ RAS-run mailing list RAS-run@lists.openlib.org http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run>
Christian, If an existing user does not open the affiliations screen during his visit and sets no shares, should we calculate the default shares for him and publish that into ReDIF and the static page? -i On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
I have already noticed this and i'm working on it.
-i
On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I just edited Gary Becker's profile, because I was getting the suspicion that those who amend their profile yet did not touch their affiliations get default share attributed. Well, I could not verify that, because his new template says:
Workplace-Name: Workplace-Share: Workplace-Name: Workplace-Share:
First time I see this in my verifications.
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
______________________________**_________________ RAS-run mailing list RAS-run@lists.openlib.org http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run>
No. These shares should be a choice of the user. On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
Christian,
If an existing user does not open the affiliations screen during his visit and sets no shares, should we calculate the default shares for him and publish that into ReDIF and the static page?
-i
On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
I have already noticed this and i'm working on it.
-i
On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I just edited Gary Becker's profile, because I was getting the suspicion that those who amend their profile yet did not touch their affiliations get default share attributed. Well, I could not verify that, because his new template says:
Workplace-Name: Workplace-Share: Workplace-Name: Workplace-Share:
First time I see this in my verifications.
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
______________________________**_________________ RAS-run mailing list RAS-run@lists.openlib.org http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run>
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
Christian, And what if the user opens the affiliations screen, but does no change to the shares? Let's say I have two affiliations, I open the affiliations screen, see 50 / 50 there, and think to myself: 'this is okay' and i do not save the shares and they are not saved to profile & ReDIF template. On Thu, Mar 1, 2012 at 6:05 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
No. These shares should be a choice of the user.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
Christian,
If an existing user does not open the affiliations screen during his visit and sets no shares, should we calculate the default shares for him and publish that into ReDIF and the static page?
-i
On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
I have already noticed this and i'm working on it.
-i
On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I just edited Gary Becker's profile, because I was getting the suspicion
that those who amend their profile yet did not touch their affiliations get default share attributed. Well, I could not verify that, because his new template says:
Workplace-Name: Workplace-Share: Workplace-Name: Workplace-Share:
First time I see this in my verifications.
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
______________________________****_________________ RAS-run mailing list RAS-run@lists.openlib.org http://lists.openlib.org/cgi-****bin/mailman/listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> <**http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run>
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
I've just installed a patch. Affiliation shares should only appear in ReDIF and the static profile page after the user having more than one affiliation has visited the affiliations profile. If the user have not visited the affiliations screen, no shares should appear in ReDIF & amf. Also, no more empty Workplace-Name and Workplace-Institution attributes. Christian, if you can test this or check by reviewing the templates of currently working users, i'll be very grateful. Still have to regenerate the ReDIF templates. -i On Thu, Mar 1, 2012 at 6:05 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
No. These shares should be a choice of the user.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
Christian,
If an existing user does not open the affiliations screen during his visit and sets no shares, should we calculate the default shares for him and publish that into ReDIF and the static page?
-i
On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
I have already noticed this and i'm working on it.
-i
On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I just edited Gary Becker's profile, because I was getting the suspicion
that those who amend their profile yet did not touch their affiliations get default share attributed. Well, I could not verify that, because his new template says:
Workplace-Name: Workplace-Share: Workplace-Name: Workplace-Share:
First time I see this in my verifications.
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
______________________________****_________________ RAS-run mailing list RAS-run@lists.openlib.org http://lists.openlib.org/cgi-****bin/mailman/listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> <**http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run>
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
I tried with j.benson.durham@frb.gov. Workplace-Name: is now empty. On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
I've just installed a patch. Affiliation shares should only appear in ReDIF and the static profile page after the user having more than one affiliation has visited the affiliations profile.
If the user have not visited the affiliations screen, no shares should appear in ReDIF & amf.
Also, no more empty Workplace-Name and Workplace-Institution attributes.
Christian, if you can test this or check by reviewing the templates of currently working users, i'll be very grateful.
Still have to regenerate the ReDIF templates.
-i
On Thu, Mar 1, 2012 at 6:05 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
No. These shares should be a choice of the user.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
Christian,
If an existing user does not open the affiliations screen during his visit and sets no shares, should we calculate the default shares for him and publish that into ReDIF and the static page?
-i
On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
I have already noticed this and i'm working on it.
-i
On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I just edited Gary Becker's profile, because I was getting the suspicion
that those who amend their profile yet did not touch their affiliations get default share attributed. Well, I could not verify that, because his new template says:
Workplace-Name: Workplace-Share: Workplace-Name: Workplace-Share:
First time I see this in my verifications.
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
______________________________****_________________ RAS-run mailing list RAS-run@lists.openlib.org http://lists.openlib.org/cgi-****bin/mailman/listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> <**http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run>
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
What exactly did you do? -i On Thu, Mar 1, 2012 at 8:17 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I tried with j.benson.durham@frb.gov. Workplace-Name: is now empty.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
I've just installed a patch. Affiliation shares should only appear in
ReDIF and the static profile page after the user having more than one affiliation has visited the affiliations profile.
If the user have not visited the affiliations screen, no shares should appear in ReDIF & amf.
Also, no more empty Workplace-Name and Workplace-Institution attributes.
Christian, if you can test this or check by reviewing the templates of currently working users, i'll be very grateful.
Still have to regenerate the ReDIF templates.
-i
On Thu, Mar 1, 2012 at 6:05 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
No. These shares should be a choice of the user.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
Christian,
If an existing user does not open the affiliations screen during his visit and sets no shares, should we calculate the default shares for him and publish that into ReDIF and the static page?
-i
On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
I have already noticed this and i'm working on it.
-i
On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I just edited Gary Becker's profile, because I was getting the suspicion
that those who amend their profile yet did not touch their affiliations get default share attributed. Well, I could not verify that, because his new template says:
Workplace-Name: Workplace-Share: Workplace-Name: Workplace-Share:
First time I see this in my verifications.
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
______________________________******_________________ RAS-run mailing list RAS-run@lists.openlib.org http://lists.openlib.org/cgi-******bin/mailman/listinfo/ras-**run<http://lists.openlib.org/cgi-****bin/mailman/listinfo/ras-run> <http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> > <**http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> <http://lists.openlib.**org/cgi-bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run> >
> >
--
Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
I only added one research item. On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
What exactly did you do?
-i
On Thu, Mar 1, 2012 at 8:17 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I tried with j.benson.durham@frb.gov. Workplace-Name: is now empty.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
I've just installed a patch. Affiliation shares should only appear in
ReDIF and the static profile page after the user having more than one affiliation has visited the affiliations profile.
If the user have not visited the affiliations screen, no shares should appear in ReDIF & amf.
Also, no more empty Workplace-Name and Workplace-Institution attributes.
Christian, if you can test this or check by reviewing the templates of currently working users, i'll be very grateful.
Still have to regenerate the ReDIF templates.
-i
On Thu, Mar 1, 2012 at 6:05 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
No. These shares should be a choice of the user.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
Christian,
If an existing user does not open the affiliations screen during his visit and sets no shares, should we calculate the default shares for him and publish that into ReDIF and the static page?
-i
On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
I have already noticed this and i'm working on it.
-i
On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I just edited Gary Becker's profile, because I was getting the suspicion
> that those who amend their profile yet did not touch their > affiliations > get > default share attributed. Well, I could not verify that, because his > new > template says: > > Workplace-Name: > Workplace-Share: > Workplace-Name: > Workplace-Share: > > First time I see this in my verifications. > > -- > Christian Zimmermann FIGUGEGL! > Economic Research > Federal Reserve Bank of St. Louis > P.O. Box 442 > St. Louis MO 63166-0442 USA > http://ideas.repec.org/zimm/ > > ______________________________******_________________ > RAS-run mailing list > RAS-run@lists.openlib.org > http://lists.openlib.org/cgi-******bin/mailman/listinfo/ras-**run<http://lists.openlib.org/cgi-****bin/mailman/listinfo/ras-run> > <http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> >> > <**http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> > <http://lists.openlib.**org/cgi-bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run> >> > >> >> > >
--
Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
I have been able to reproduce it, but i fail to understand, why it happens. I'll rest a bit and would continue tomorrow. -ivan On Thu, Mar 1, 2012 at 8:23 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I only added one research item.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
What exactly did you do?
-i
On Thu, Mar 1, 2012 at 8:17 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I tried with j.benson.durham@frb.gov. Workplace-Name: is now empty.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
I've just installed a patch. Affiliation shares should only appear in
ReDIF and the static profile page after the user having more than one affiliation has visited the affiliations profile.
If the user have not visited the affiliations screen, no shares should appear in ReDIF & amf.
Also, no more empty Workplace-Name and Workplace-Institution attributes.
Christian, if you can test this or check by reviewing the templates of currently working users, i'll be very grateful.
Still have to regenerate the ReDIF templates.
-i
On Thu, Mar 1, 2012 at 6:05 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
No. These shares should be a choice of the user.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
Christian,
If an existing user does not open the affiliations screen during his visit and sets no shares, should we calculate the default shares for him and publish that into ReDIF and the static page?
-i
On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
I have already noticed this and i'm working on it.
> -i > > > On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < > zimmermann@stlouisfed.org> wrote: > > I just edited Gary Becker's profile, because I was getting the > suspicion > > that those who amend their profile yet did not touch their >> affiliations >> get >> default share attributed. Well, I could not verify that, because his >> new >> template says: >> >> Workplace-Name: >> Workplace-Share: >> Workplace-Name: >> Workplace-Share: >> >> First time I see this in my verifications. >> >> -- >> Christian Zimmermann FIGUGEGL! >> Economic Research >> Federal Reserve Bank of St. Louis >> P.O. Box 442 >> St. Louis MO 63166-0442 USA >> http://ideas.repec.org/zimm/ >> >> ______________________________********_________________ >> RAS-run mailing list >> RAS-run@lists.openlib.org >> http://lists.openlib.org/cgi-********bin/mailman/listinfo/ras-** >> **run<http://lists.openlib.org/cgi-******bin/mailman/listinfo/ras-**run> >> <http://lists.openlib.**org/cgi-****bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-****bin/mailman/listinfo/ras-run> >> > >> <http://lists.openlib.org/****cgi-**bin/mailman/listinfo/**** >> ras-run<http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run> >> <http://lists.openlib.**org/cgi-**bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> >> > >> >>> >>> <**http://lists.openlib.org/****cgi-**bin/mailman/listinfo/**** >> ras-run<http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run> >> <http://lists.openlib.**org/cgi-**bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> >> > >> <http://lists.openlib.**org/**cgi-bin/mailman/listinfo/****ras-run<; >> http://lists.openlib.**org/cgi-bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run> >> > >> >>> >>> >> >>> >>> >> >> > > --
Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
Christian please try again. I think i've done it now. -i On Thu, Mar 1, 2012 at 9:42 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
I have been able to reproduce it, but i fail to understand, why it happens. I'll rest a bit and would continue tomorrow.
-ivan
On Thu, Mar 1, 2012 at 8:23 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I only added one research item.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
What exactly did you do?
-i
On Thu, Mar 1, 2012 at 8:17 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I tried with j.benson.durham@frb.gov. Workplace-Name: is now empty.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
I've just installed a patch. Affiliation shares should only appear in
ReDIF and the static profile page after the user having more than one affiliation has visited the affiliations profile.
If the user have not visited the affiliations screen, no shares should appear in ReDIF & amf.
Also, no more empty Workplace-Name and Workplace-Institution attributes.
Christian, if you can test this or check by reviewing the templates of currently working users, i'll be very grateful.
Still have to regenerate the ReDIF templates.
-i
On Thu, Mar 1, 2012 at 6:05 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
No. These shares should be a choice of the user.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
Christian,
> If an existing user does not open the affiliations screen during his > visit > and sets no shares, should we calculate the default shares for him > and > publish that into ReDIF and the static page? > > -i > > On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov <duraley@gmail.com> > wrote: > > I have already noticed this and i'm working on it. > > >> -i >> >> >> On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < >> zimmermann@stlouisfed.org> wrote: >> >> I just edited Gary Becker's profile, because I was getting the >> suspicion >> >> that those who amend their profile yet did not touch their >>> affiliations >>> get >>> default share attributed. Well, I could not verify that, because >>> his >>> new >>> template says: >>> >>> Workplace-Name: >>> Workplace-Share: >>> Workplace-Name: >>> Workplace-Share: >>> >>> First time I see this in my verifications. >>> >>> -- >>> Christian Zimmermann FIGUGEGL! >>> Economic Research >>> Federal Reserve Bank of St. Louis >>> P.O. Box 442 >>> St. Louis MO 63166-0442 USA >>> http://ideas.repec.org/zimm/ >>> >>> ______________________________********_________________ >>> RAS-run mailing list >>> RAS-run@lists.openlib.org >>> http://lists.openlib.org/cgi-********bin/mailman/listinfo/ras-** >>> **run<http://lists.openlib.org/cgi-******bin/mailman/listinfo/ras-**run> >>> <http://lists.openlib.**org/cgi-****bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-****bin/mailman/listinfo/ras-run> >>> > >>> <http://lists.openlib.org/****cgi-**bin/mailman/listinfo/**** >>> ras-run<http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run> >>> <http://lists.openlib.**org/cgi-**bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> >>> > >>> >>>> >>>> <**http://lists.openlib.org/****cgi-**bin/mailman/listinfo/**** >>> ras-run<http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run> >>> <http://lists.openlib.**org/cgi-**bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> >>> > >>> <http://lists.openlib.**org/**cgi-bin/mailman/listinfo/**** >>> ras-run<http://lists.openlib.**org/cgi-bin/mailman/listinfo/** >>> ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run> >>> > >>> >>>> >>>> >>> >>>> >>>> >>> >>> >> >> -- > Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
It works fine, as far as I can see. It also does not add share in absentia. Now, there are going to be some templates that have been contaminated with empty fields. Can you revert that? On Thu, 1 Mar 2012, 'Christian Zimmermann' wrote:
I only added one research item.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
What exactly did you do?
-i
On Thu, Mar 1, 2012 at 8:17 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I tried with j.benson.durham@frb.gov. Workplace-Name: is now empty.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
I've just installed a patch. Affiliation shares should only appear in
ReDIF and the static profile page after the user having more than one affiliation has visited the affiliations profile.
If the user have not visited the affiliations screen, no shares should appear in ReDIF & amf.
Also, no more empty Workplace-Name and Workplace-Institution attributes.
Christian, if you can test this or check by reviewing the templates of currently working users, i'll be very grateful.
Still have to regenerate the ReDIF templates.
-i
On Thu, Mar 1, 2012 at 6:05 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
No. These shares should be a choice of the user.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
Christian,
If an existing user does not open the affiliations screen during his visit and sets no shares, should we calculate the default shares for him and publish that into ReDIF and the static page?
-i
On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
I have already noticed this and i'm working on it.
> > -i > > > On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < > zimmermann@stlouisfed.org> wrote: > > I just edited Gary Becker's profile, because I was getting the > suspicion > > > that those who amend their profile yet did not touch their > > affiliations > > get > > default share attributed. Well, I could not verify that, > > because his > > new > > template says: > > > > Workplace-Name: > > Workplace-Share: > > Workplace-Name: > > Workplace-Share: > > > > First time I see this in my verifications. > > > > -- > > Christian Zimmermann FIGUGEGL! > > Economic Research > > Federal Reserve Bank of St. Louis > > P.O. Box 442 > > St. Louis MO 63166-0442 USA > > http://ideas.repec.org/zimm/ > > > > ______________________________******_________________ > > RAS-run mailing list > > RAS-run@lists.openlib.org > > http://lists.openlib.org/cgi-******bin/mailman/listinfo/ras-**run<http://lists.openlib.org/cgi-****bin/mailman/listinfo/ras-run> > > <http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> > > > > > <**http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run> > > <http://lists.openlib.**org/cgi-bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run> > > > > > > > > > > > > > > > > > --
Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
On Thu, Mar 1, 2012 at 10:29 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
It works fine, as far as I can see. It also does not add share in absentia.
Now, there are going to be some templates that have been contaminated with empty fields. Can you revert that?
I will have to do that. -i
On Thu, 1 Mar 2012, 'Christian Zimmermann' wrote:
I only added one research item.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
What exactly did you do?
-i
On Thu, Mar 1, 2012 at 8:17 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I tried with j.benson.durham@frb.gov. Workplace-Name: is now empty.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote: I've just installed a patch. Affiliation shares should only appear in ReDIF and the static profile page after the user having more than one affiliation has visited the affiliations profile. > If the user have not visited the affiliations screen, no shares should appear in ReDIF & amf. > Also, no more empty Workplace-Name and Workplace-Institution > attributes. > Christian, if you can test this or check by reviewing the templates of currently working users, i'll be very grateful. > > > Still have to regenerate the ReDIF templates. > -i > On Thu, Mar 1, 2012 at 6:05 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote: > No. These shares should be a choice of the user. > > > > > > On Thu, 1 Mar 2012, Ivan Kurmanov wrote: > > > Christian, > > > > > > > > If an existing user does not open the affiliations screen during > > > > his > visit > and sets no shares, should we calculate the default shares for him > > > > and > publish that into ReDIF and the static page? > > > > > -i > > > > > On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov < duraley@gmail.com> > wrote: > > > > > I have already noticed this and i'm working on it. > > > > > > > > > > > -i > > > > > > > > > > > > On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < > > zimmermann@stlouisfed.org> wrote: > > > > > > > I just edited Gary Becker's profile, because I was getting the > > suspicion > > > > > > > > that those who amend their profile yet did not touch their > > > affiliations > > > get > > > default share attributed. Well, I could not verify that, > > > because his > > > new > > > template says: > > > > > > > > > Workplace-Name: > > > Workplace-Share: > > > Workplace-Name: > > > Workplace-Share: > > > > > > > > > First time I see this in my verifications. > > > > > > > > > -- > > > Christian Zimmermann FIGUGEGL! > > > Economic Research > > > Federal Reserve Bank of St. Louis > > > P.O. Box 442 > > > St. Louis MO 63166-0442 USA > > > http://ideas.repec.org/zimm/ > > > > > > > > > ______________________________** ******_________________ > > > RAS-run mailing list > > > RAS-run@lists.openlib.org > > > http://lists.openlib.org/cgi-*** *****bin/mailman/listinfo/ras-****run<http://lists.openlib.org/cgi-******bin/mailman/listinfo/ras-**run> <http://lists.openlib.**org/cgi-****bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-****bin/mailman/listinfo/ras-run>
> > > <http://lists.openlib.org/****cgi-**bin/mailman/listinfo/** **ras-run<http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run> <http://lists.openlib.**org/cgi-**bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run>
> > > > > > > > > > <**http://lists.openlib.org/**** cgi-**bin/mailman/listinfo/****ras-run<http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run> <http://lists.openlib.**org/cgi-**bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run>
> > > <http://lists.openlib.**org/**cgi-bin/mailman/listinfo/**** ras-run<http://lists.openlib.**org/cgi-bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run>
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/ > > > > > > -- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
But in some profiles the default shares are already set, and I can't revert that. -i On Thu, Mar 1, 2012 at 10:33 PM, Ivan Kurmanov <duraley@gmail.com> wrote:
On Thu, Mar 1, 2012 at 10:29 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
It works fine, as far as I can see. It also does not add share in absentia.
Now, there are going to be some templates that have been contaminated with empty fields. Can you revert that?
I will have to do that.
-i
On Thu, 1 Mar 2012, 'Christian Zimmermann' wrote:
I only added one research item.
On Thu, 1 Mar 2012, Ivan Kurmanov wrote:
What exactly did you do?
-i
On Thu, Mar 1, 2012 at 8:17 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote:
I tried with j.benson.durham@frb.gov. Workplace-Name: is now empty.
> On Thu, 1 Mar 2012, Ivan Kurmanov wrote: I've just installed a patch. Affiliation shares should only appear in ReDIF and the static profile page after the user having more than one affiliation has visited the affiliations profile. > > If the user have not visited the affiliations screen, no shares should appear in ReDIF & amf. > > Also, no more empty Workplace-Name and Workplace-Institution > attributes. > > Christian, if you can test this or check by reviewing the templates of currently working users, i'll be very grateful. > > > > Still have to regenerate the ReDIF templates. > > -i > > On Thu, Mar 1, 2012 at 6:05 PM, Christian Zimmermann < zimmermann@stlouisfed.org> wrote: > > No. These shares should be a choice of the user. > > > > > > > On Thu, 1 Mar 2012, Ivan Kurmanov wrote: > > > > Christian, > > > > > > > > > If an existing user does not open the affiliations screen during > > > > his > > visit > > and sets no shares, should we calculate the default shares for him > > > > and > > publish that into ReDIF and the static page? > > > > > > -i > > > > > > On Thu, Mar 1, 2012 at 5:39 PM, Ivan Kurmanov < duraley@gmail.com> > > wrote: > > > > > > I have already noticed this and i'm working on it. > > > > > > > > > > > > -i > > > > > > > > > > > > > On Thu, Mar 1, 2012 at 5:31 PM, Christian Zimmermann < > > > zimmermann@stlouisfed.org> wrote: > > > > > > > > I just edited Gary Becker's profile, because I was getting the > > > suspicion > > > > > > > > > that those who amend their profile yet did not touch their > > > > affiliations > > > > get > > > > default share attributed. Well, I could not verify that, > > > > because his > > > > new > > > > template says: > > > > > > > > > > Workplace-Name: > > > > Workplace-Share: > > > > Workplace-Name: > > > > Workplace-Share: > > > > > > > > > > First time I see this in my verifications. > > > > > > > > > > -- > > > > Christian Zimmermann FIGUGEGL! > > > > Economic Research > > > > Federal Reserve Bank of St. Louis > > > > P.O. Box 442 > > > > St. Louis MO 63166-0442 USA > > > > http://ideas.repec.org/zimm/ > > > > > > > > > > ______________________________** ******_________________ > > > > RAS-run mailing list > > > > RAS-run@lists.openlib.org > > > > http://lists.openlib.org/cgi-*** *****bin/mailman/listinfo/ras-****run<http://lists.openlib.org/cgi-******bin/mailman/listinfo/ras-**run> <http://lists.openlib.**org/cgi-****bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-****bin/mailman/listinfo/ras-run>
> > > > <http://lists.openlib.org/**** cgi-**bin/mailman/listinfo/****ras-run<http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run> <http://lists.openlib.**org/cgi-**bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run>
> > > > > > > > > > > <**http://lists.openlib.org/**** cgi-**bin/mailman/listinfo/****ras-run<http://lists.openlib.org/**cgi-**bin/mailman/listinfo/**ras-run> <http://lists.openlib.**org/cgi-**bin/mailman/**listinfo/ras-run<http://lists.openlib.org/cgi-**bin/mailman/listinfo/ras-run>
> > > > <http://lists.openlib.**org/**cgi-bin/mailman/listinfo/*** *ras-run<http://lists.openlib.**org/cgi-bin/mailman/listinfo/**ras-run<http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run>
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > Christian Zimmermann FIGUGEGL! > Economic Research > Federal Reserve Bank of St. Louis > P.O. Box 442 > St. Louis MO 63166-0442 USA > http://ideas.repec.org/zimm/ > > > > > > > -- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
-- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/
participants (2)
-
'Christian Zimmermann' -
Ivan Kurmanov