October 2011 - RAS-run

almost
by 'Christian Zimmermann' 27 Oct '11

27 Oct '11

after last night's update of IDEAS, I notice that RAS has 29999 authors registered. -- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/

1 0

acis development
by Thomas Krichel 26 Oct '11

26 Oct '11

Hi, Is there any news regarding the state of development of ACIS as requested by Christian? I have not seen a patch to the ACIS software. Will Ivan's work be a fork of ACIS? I thought we had agreed to work on a test installation of the current ACIS that I would prepare. I had not completed but I was not far off the target, when I got snowed under by teaching. I can't spend much of any time on this now but I can try to find some time for this this week, because I have a little breather. It now looks that coming mid-january, I will be able to spend some serious time on ACIS. I will finish teaching an mid-March and then be free to work on ACIS and AuthorClaim until September next 2012. Cheers, Thomas Krichel http://openlib.org/home/krichel http://authorprofile.org/pkr1 skype: thomaskrichel

3 5

SPF record
by Dan Hayes 07 Oct '11

07 Oct '11

Can an SPF record be setup for repec.org to allow 65.89.18.25 as a designated sender for authors(a)repec.org?

2 2

Mail Return-Path
by Dan Hayes 04 Oct '11

04 Oct '11

We discussed earlier that emails were bouncing back to aras(a)nebka.stlouisfed.org instead of authors(a)repec.org. I've found that if we add the header "Return-Path: authors(a)repec.org", the bounced emails would go directly to the correct address.

1 0

Re: [RAS] Cron <aras@nebka> ~/bin/ras2citec-export-job.sh
by 'Christian Zimmermann' 04 Oct '11

04 Oct '11

Something is not right. On Mon, 3 Oct 2011, Cron Daemon wrote: > /home/aras/bin/ras2citec-export-job.sh: line 6: /home/aras/opt/log/citec-export.log: No such file or directory > -- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/

2 1

Re: [RAS] cit_events
by Ivan Kurmanov 03 Oct '11

03 Oct '11

yes, it worked now. Thanks. And I've found another bug in my new script. :) -ivan On Mon, Oct 3, 2011 at 10:51 AM, Jose Manuel Barrueco <barrueco(a)uv.es> wrote: > > try it again. I shut off mysql to do the monthly update. It took 10 > minutes but you try in this time... sorry, > > On Mon, 3 Oct 2011, Ivan Kurmanov wrote: > >> this is what I get now when I try to process the most recent data file: >> >> startup [16599] /home/adnetec/Ivan/handle_ras_exports.pl >> exports dir: /home/adnetec/ras-exports/ >> process /home/adnetec/ras-exports/cit_events.2011-10-02 >> DBI >> connect('citec2;host=localhost;port=3307;mysql_read_default_file=/home/adnetec/.my.cnf','',...) >> failed: Can't connect to local MySQL server through socket >> '/home/adnetec/var/run/mysqld.sock' (2) at >> /home/adnetec/CitEc/lib/citec.pm line 54 >> Can't call method "do" on an undefined value at >> /home/adnetec/CitEc/lib/citec.pm line 57. >> done >> >> (this happens on sopri) >> >> yesterday (approx. 12 hours ago) it worked. >> >> -i >> >> On Mon, Oct 3, 2011 at 9:47 AM, Jose Manuel Barrueco <barrueco(a)uv.es> >> wrote: >>> >>> Great! Just on time to include the citations added in the last >>> month >>> to the next authors mailing. Thanks Ivan. >>> >>> >>> On Sun, 2 Oct 2011, Ivan Kurmanov wrote: >>> >>>> I've copied the missing export files from nebka to sopri and have >>>> manually processed it there. >>>> >>>> I've made a new script on nebka: ~/bin/ras2citec-export-job.sh . It >>>> copies the export files to sopri and executes a script there, >>>> ~/Ivan/handle_ras_exports.pl . And it would log the result to a file >>>> on nebka. I've disabled the old cronjob on sopri. >>>> >>>> I'll check tomorrow if the arrangement works. >>>> >>>> -i >>>> >>>> On Mon, Sep 26, 2011 at 9:52 AM, Jose Manuel Barrueco <barrueco(a)uv.es> >>>> wrote: >>>>> >>>>> Hi Ivan, >>>>> >>>>> You should have already access to adnetec(a)sopri.openlib.org, if >>>>> not, >>>>> please send me your public key to add ssh access. The script is: >>>>> >>>>> /home/adnetec/etc/ras-exports-cronjob.sh >>>>> >>>>> this runs from a cron job every night. Regards, >>>>> >>>>> >>>>> On Fri, 23 Sep 2011, Ivan Kurmanov wrote: >>>>> >>>>>> Jose, >>>>> >>>>> I could look into that, if i'm given access and if you point me to >>>>> that particular script. >>>>> >>>>> (I'm in the area of a little unstable internet access right now.) >>>>> >>>>> -ivan >>>>> >>>>> On Fri, Sep 23, 2011 at 10:32 AM, Jose Manuel Barrueco <barrueco(a)uv.es> >>>>> wrote: >>>>>> >>>>>> Hi Dan, the files are now in sopri. The problem is that we need >>>>>> to >>>>>> change the update script there because it was wrotten to fetch the >>>>>> files >>>>>> from nebka. At the moment the script can't know what the new files >>>>>> are. >>>>>> Ivan >>>>>> could you have a look into this since the script was yours? Thanks, >>>>>> >>>>>> >>>>>> >>>>>> On Wed, 21 Sep 2011, Dan Hayes wrote: >>>>>> >>>>>>> Our policy is to not allow access to our servers from outside >>>>>>> parties. >>>>>>> Can >>>>>>> we push the data to you instead of you pulling it from us? >>>>>>> >>>>>>> On Wed, Sep 21, 2011 at 7:04 AM, Jose Manuel Barrueco >>>>>>> <barrueco(a)uv.es>wrote: >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>> adnetec@sopri should have ssh access to the new nebka >>>>>>>>>> machine >>>>>>>>>> a directory /home/adnetec/ras-exports should exists there >>>>>>>>>> where >>>>>>>>>> cit_events files are stored. >>>>>>>>>> >>>>>>>>>> >>>>>>>>> I had set up the access many days ago. >>>>>>>>> >>>>>>>> >>>>>>>> Then, the directory /home/adnetec/ras-exports is needed. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> --- >>>>>>>> José Manuel Barrueco >>>>>>>> http://www.uv.es/=barrueco >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> RAS-run mailing list >>>>>>>> RAS-run(a)lists.openlib.org >>>>>>>> http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> --- >>>>>> José Manuel Barrueco >>>>>> http://www.uv.es/=barrueco >>>>>> >>>>>> _______________________________________________ >>>>>> RAS-run mailing list >>>>>> RAS-run(a)lists.openlib.org >>>>>> http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run >>>>>> >>>>> >>>>> _______________________________________________ >>>>> RAS-run mailing list >>>>> RAS-run(a)lists.openlib.org >>>>> http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run >>>>> >>>>> >>>>> --- >>>>> José Manuel Barrueco >>>>> http://www.uv.es/=barrueco >>>>> >>>>> _______________________________________________ >>>>> RAS-run mailing list >>>>> RAS-run(a)lists.openlib.org >>>>> http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run >>>>> >>>> >>>> >>> >>> >>> --- >>> José Manuel Barrueco >>> http://www.uv.es/=barrueco >>> >> >> > > > --- > José Manuel Barrueco http://www.uv.es/=barrueco >

1 0

cit_events
by Jose Manuel Barrueco 03 Oct '11

03 Oct '11

I'm resending this message since I got no reaction to the first one. The communication of citations from nebka to sopri is broken since Sep 5. adnetec@sopri should have ssh access to the new nebka machine a directory /home/adnetec/ras-exports should exists there where cit_events files are stored. That's all I can say about the problem.... Regards, --- José Manuel Barrueco http://www.uv.es/=barrueco ---------- Forwarded message ---------- Date: Mon, 19 Sep 2011 09:11:15 +0200 (Hora de verano romance) From: Jose Manuel Barrueco <barrueco(a)uv.es> To: CitEc-Run <Citec-run(a)lists.openlib.org> Cc: RAS-run Mailing List <ras-run(a)lists.openlib.org> Subject: cit_events Hi, files cit_events are missing in sopri since Sep 6th. cit_events are citations added by authors using RAS. Not sure if they don't exist for the last days or if there is a problem with permissions in the rsyn from the new server to sopri. BTW, we have been testing the input form for citations and it seems to work fine. In the last two week, 105 papers have been processed and 4300 references submitted using this form. It would be useful if you can link from IDEAS/EconPapers to the citec page in those papers which have no references found. The link should look like: http://citec.repec.org/cgi-bin/ui.pl?h=<handle> Comments are welcome... On Wed, 16 Jul 2008, Christian Zimmermann wrote: > It is possible to find references for the articles of the journals of this > publisher through an obvious modification of the File-URL. > > Christian Zimmermann FIGUGEGL! > Department of Economics > University of Connecticut > 341 Mansfield Road, Unit 1063 > Storrs, CT 06269-1063 > http://ideas.repec.org/zimm/ christian.zimmermann(a)uconn.edu > http://ideas.repec.org/e/pzi1.html > > _______________________________________________ > CitEc-run mailing list > CitEc-run(a)lists.openlib.org > http://lists.openlib.org/cgi-bin/mailman/listinfo/citec-run > > --- José Manuel Barrueco http://www.uv.es/=barrueco

4 11

Missing data in RAS
by Sune Karlsson 02 Oct '11

02 Oct '11

I've had some complaints from an author that his paper in taf:jitecd was suddenly missing from his author page. Doing a handle search in the author service I only find 150 items for taf:jitecd, there should be about 365. Is the new server mirroring properly? /Sune -- Sune Karlsson Professor of Statistics Handelshögskolan/Swedish Business School Dekanus/Dean Fakulteten för ekonomi-, natur- och teknikvetenskap Örebro University, SE-70182 Örebro, Sweden Phone +46 19 301257/301415 http://www.oru.se/hh/sune_karlsson http://econpapers.repec.org/RAS/pka1.htm

2 1

Sender ID
by 'Christian Zimmermann' 01 Oct '11

01 Oct '11

Still getting "sender ID not permitted" errors -- Christian Zimmermann FIGUGEGL! Economic Research Federal Reserve Bank of St. Louis P.O. Box 442 St. Louis MO 63166-0442 USA http://ideas.repec.org/zimm/ ---------- Forwarded message ---------- Date: 30 Sep 2011 20:32:24 -0500 From: Mail Delivery System <MAILER-DAEMON(a)mx1.stlouisfed.org> To: aras(a)nebka.stlouisfed.org Subject: Delivery Status Notification (Failure) The following message to <klaus.becker(a)ttu.edu> was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 550-'5.7.1 Sender ID (PRA) Not Permitted'

1 0