- RAS-run - RePEc Lists

[dm@plan.be: Problem linking to Journal article]
by Thomas Krichel 18 Apr '16

18 Apr '16

----- Forwarded message from Michel Dumont <dm(a)plan.be> ----- From: Michel Dumont <dm(a)plan.be> To: "repec(a)repec.org" <repec(a)repec.org> Subject: Problem linking to Journal article Dear Sir/Madam, I have tried a couple of times to link an article in the Journal of Productivity Analysis, which I co-authored, to my list of accepted works. Although the article already appears in the Journal list on Repec it is not recognized in the automatic search. I also failed several times to link the article through the manual search. I tried with the title (Semiparametric stochastic metafrontier efficiency of European manufacturing firms) as well as the RePEc handle (RePEc:kap:jproda:v:45:y:2016:i:1:p:53-69) but this does not seem to work. Could you tell me whether there is a problem with this link? Article details: ******************************************** Semiparametric stochastic metafrontier efficiency of European manufacturing firms Article provided by Springer in its journal Journal of Productivity Analysis<https://ideas.repec.org/s/kap/jproda.html>. Volume (Year): 45 (2016) Issue (Month): 1 (February) Pages: 53-69 ******************************************* Kind regards, Michel Michel Dumont Structural studies Federal Planning Bureau Economic analyses and forecast Kunstlaan, 47-49 | 1000 Brussel tel. +32 (0)2 507 73 85 fax +32 (0)2 507 73 73 e-mail: dm(a)plan.be<mailto:dm@plan.be> | www.plan.be<http://www.plan.be/> Disclaimer: This e-mail may contain confidential information which is intended only for the use of the recipient(s) named above. If you have received this communication in error, please notify the sender immediately and delete this e-mail from your system. Please note that e-mail messages cannot be considered as official information from the Federal Planning Bureau. ----- End forwarded message ----- -- Cheers, Thomas Krichel http://openlib.org/home/krichel skype:thomaskrichel

2 4

Re: [RAS] ReDIF-perl trouble
by Thomas Krichel 12 Apr '16

12 Apr '16

'Christian Zimmermann' writes > 2) I notice today the ReDIF-perl was not installed on RAS. after > installation though, emails have broken. the to field is malformed, for > example: > > The following message to <"Christian Zimmermann" > <zimmermann(a)stlouisfed.org>@mx1.stlouisfed.org> was > undeliverable. > > returning to 2.70 fixed the problem, so it has nothing to do with any > external perl module that refreshed during install. I suspect this has to do > with the following in Parser.pm: > > < 'remove_newline_from_values' => 0, > >#SK 'remove_newline_from_values' => 0, Obsoleted by new > Unicode processing, newlines are always removed > > or at least that is all I can see. > > I have spent several hours on this, need some sleep now and am open for > suggestions or inspiration. RAS code is horrible. Tell me about it. ;-). If you give me access I will try to fix. -- Cheers, Thomas Krichel http://openlib.org/home/krichel skype:thomaskrichel

4 20

[MAILER-DAEMON@h1rsrchmx1.stlouisfed.org: Delivery Status Notification (Failure)]
by Thomas Krichel 18 Oct '15

18 Oct '15

We get these to the authors email address. Fondue is long gone it seems. ----- Forwarded message from Mail Delivery System <MAILER-DAEMON(a)h1rsrchmx1.stlouisfed.org> ----- Return-path: <> Envelope-to: krichel(a)openlib.org Delivery-date: Sun, 18 Oct 2015 16:21:35 +0000 Received: from shuli.openlib.org ([144.76.58.107]) by modin.openlib.org with esmtp (Exim 4.86) id 1ZnqiE-0002Bu-Dt for krichel(a)openlib.org; Sun, 18 Oct 2015 16:21:35 +0000 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=h1rsrchmx1.stlouisfed.org; s=all; h=Subject:Content-Type:MIME-Version:From: To:Date:Message-Id; bh=BZ148V9CUKdH1Gatd+VpuMutBEFanw65vQYL6t7iMso=; b=Nzu4uZ e/XSZ5pbxoMjPgtz6MutCdjI0EcvvsBJsDvgL/MKpeBoyC/ZsZZT8AE9uBpc+puSwhDSaSIRIkCY8 fDpL16NmsWON6kacCLavvDRk4eYJwhNgDjIGB92ipMgBO++6mefOeq7lkN7JcsrD2O2FqwkzFWQz6 AidngPv97vg=; Received: from mx1.stlouisfed.org ([65.89.18.25]) by shuli.openlib.org with esmtp (Exim 4.86) id 1Znqhp-0004Nl-42 for authors(a)repec.org; Sun, 18 Oct 2015 16:21:19 +0000 Message-Id: <dd8e48$g6nn6(a)h1rsrchmx1.stlouisfed.org> Received: from localhost by mx1.stlouisfed.org; 18 Oct 2015 11:20:52 -0500 Date: 18 Oct 2015 11:20:52 -0500 To: authors(a)repec.org From: Mail Delivery System <MAILER-DAEMON(a)h1rsrchmx1.stlouisfed.org> MIME-Version: 1.0 Content-Type: multipart/report; report-type=delivery-status; boundary="10rxZ.58cDfbTgX.gkwmI.31rRop+" X-SA-Exim-Connect-IP: 144.76.58.107 X-SA-Exim-Mail-From: X-Spam-Checker-Version: SpamAssassin 3.4.1 (2015-04-28) on modin.openlib.org X-Spam-Level: X-Spam-Status: No, score=-0.9 required=5.0 tests=BAYES_00,DKIM_ADSP_NXDOMAIN, DKIM_SIGNED,MSGID_FROM_MTA_HEADER,SPF_HELO_PASS,T_DKIM_INVALID autolearn=no autolearn_force=no version=3.4.1 Subject: Delivery Status Notification (Failure) X-SA-Exim-Version: 4.2.1 (built Mon, 06 Jul 2015 07:28:29 +0000) X-SA-Exim-Scanned: Yes (on modin.openlib.org) The following message to <nobel+arrow(a)fondue.econ.uconn.edu> was undeliverable. The reason for the problem: 5.1.2 - Bad destination host 'DNS Hard Error looking up fondue.econ.uconn.edu (MX): NXDomain' Reporting-MTA: dns; h1rsrchmx1.stlouisfed.org Final-Recipient: rfc822;nobel+arrow(a)fondue.econ.uconn.edu Action: failed Status: 5.0.0 (permanent failure) Diagnostic-Code: smtp; 5.1.2 - Bad destination host 'DNS Hard Error looking up fondue.econ.uconn.edu (MX): NXDomain' (delivery attempts: 0) X-IronPort-Anti-Spam-Filtered: true X-IronPort-Anti-Spam-Result: AggGAK7GI1YKTvEK/2dsb2JhbABeDoN8b6xrAZJ2FwqHXQEBAQEBAYELhFcPAQkBZA0CBSECER0xiEgIsA2SdQwhgSKFVYdshQ8xgRQFjRJ1iBwBhRiHfAiBWEiHDIojhFqDb4QoXFQBhWYBAQE X-IronPort-AV: E=Sophos;i="5.17,698,1437454800"; d="scan'208";a="16998115" Received: from unknown (HELO nebka.stlouisfed.org) ([10.78.241.10]) by mx1.stlouisfed.org with ESMTP; 18 Oct 2015 11:20:34 -0500 Received: by nebka.stlouisfed.org (Postfix, from userid 1013) id A85E916408BE; Sun, 18 Oct 2015 11:19:21 -0500 (CDT) Content-transfer-encoding: 8bit Content-type: text/plain; charset=UTF-8 From: RePEc Author Service <authors(a)repec.org> MIME-Version: 1.0 Subject: [RePEc] automatic research profile update To: "Kenneth J. Arrow" <nobel+arrow(a)fondue.econ.uconn.edu> Message-Id: <20151018161921.A85E916408BE(a)nebka.stlouisfed.org> Date: Sun, 18 Oct 2015 11:19:21 -0500 (CDT) Dear Kenneth J. Arrow, This is an automatic message from RePEc Author Service. You do not need to reply. We ran an automatic search on our documents database for your name variations. We found this work, which you might have authored: * Sustainability and the Measurement of Wealth by Kenneth J. Arrow http://ideas.repec.org/p/nsr/niesrd/2856.html If this document is yours, you can add it to your profile on the research profile suggestions page: https://authors.repec.org/research/autosuggest You may review and change your preferences with regard to automatic research profile updates at: https://authors.repec.org/research/autoupdate --- The message was automatically generated by RePEc Author Service. https://authors.repec.org/ ----- End forwarded message ----- -- Cheers, Thomas Krichel http://openlib.org/home/krichel skype:thomaskrichel

1 0

certificate failure
by Thomas Krichel 25 Mar '14

25 Mar '14

Consider ----------------------------------------------------------------- #!/usr/bin/perl use warnings; use strict; use LWPx::ParanoidAgent; my $shortid='pkr1'; my $openid='https://authors.repec.org/pro/'.$shortid; #$ENV{'PERL_LWP_SSL_VERIFY_HOSTNAME'}=0; $ENV{HTTPS_CA_FILE} = $ENV{'HOME'} . '/opt/ca-bundle'; $ENV{HTTPS_DEBUG} = 1; ## user agent my $ua= LWPx::ParanoidAgent->new; $ua->whitelisted_hosts("authors.repec.org"); # get/set the DNS resolver object that's used my $resolver = $ua->resolver; $ua->resolver(Net::DNS::Resolver->new()); # and then just like a normal LWP::UserAgent, because it is one. my $response = $ua->get($openid); if ($response->is_success) { print $response->content; # or whatever } else { die $response->status_line; } exit; ----------------------------------------------------------------- This produces SSL_connect:before/connect initialization SSL_connect:unknown state SSL_connect:SSLv3 read server hello A SSL3 alert write:fatal:unknown CA SSL_connect:error in SSLv3 read server certificate B SSL_connect:error in SSLv3 read server certificate B SSL_connect:before/connect initialization SSL_connect:SSLv3 write client hello A SSL_connect:SSLv3 read server hello A SSL3 alert write:fatal:bad certificate SSL_connect:error in SSLv3 read server certificate B SSL_connect:before/connect initialization SSL_connect:SSLv3 write client hello A SSL_connect:SSLv3 read server hello A SSL3 alert write:fatal:bad certificate SSL_connect:error in SSLv3 read server certificate B 500 SSL negotiation failed: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed at ./test_ras line 30. What is wrong? -- Cheers, Thomas Krichel http://openlib.org/home/krichel skype:thomaskrichel

4 4

Re: [RAS] Security alerts on your author webpage
by Dan Hayes 05 Sep '13

05 Sep '13

It would make sense that you wouldn't see the same issue on the other sites. blog and citec are external. Ideas doesn't use https. Thank you for bringing it to our attention though. It is an issue that we want to be aware of. On Thu, Sep 5, 2013 at 9:46 AM, Adrian Wood <adrian.wood(a)qeh.ox.ac.uk> wrote: > Dan Many thanks for this investigation. I have done some further tests, > clicking on all the REPEC links in my monthly statistics email, which > happened to arrive this morning, and discovered that I only get this warning > on the links with 'authors' as the first word of the address - no problem > with the addresses that start blog, citec or ideas. To be clear, I never > had any doubts about the security of the REPEC site, but just worried that > the response I got might be causing general problems for you, which it > sounds as if it isn't. Adrian > > > > On 04/09/2013 20:37, Dan Hayes wrote: >> >> That's the problem. >> >> http://en.wikipedia.org/wiki/Server_Name_Indication >> >> ------- >> >> Browsers with support for TLS server name indication[6]: >> >> Internet Explorer 7 or later, on Windows Vista or higher. Does not >> work on Windows XP, even Internet Explorer 8 (because the support of >> this feature is not browser version dependent, it depends on SChannel >> system component which introduced the support of TLS SNI extension, >> starting from Windows Vista, not XP).[7] >> >> >> On Wed, Sep 4, 2013 at 12:59 PM, Adrian Wood <adrian.wood(a)qeh.ox.ac.uk> >> wrote: >>> >>> It's Windows XP Professional version 2002 service pack 3. >>> >>> >>> On 04/09/2013 14:54, Dan Hayes wrote: >>>> >>>> What operating system (and versions) are you using? >>>> >>>> On Wed, Sep 4, 2013 at 2:34 AM, Adrian Wood <adrian.wood(a)qeh.ox.ac.uk> >>>> wrote: >>>>> >>>>> Thanks for your message. I'm using IE 8, not 6. Adrian >>>>> >>>>> >>>>> >>>>> On 02/09/2013 19:16, 'Christian Zimmermann' wrote: >>>>>> >>>>>> We had one other user reporting a similar problem a few weeks ago. We >>>>>> think this may be due to Internet Explorer 6 that is not handling >>>>>> properly >>>>>> wildcard security certificates. Are you using IE6? If not, could you >>>>>> give me >>>>>> more details? >>>>>> >>>>>> On Mon, 2 Sep 2013, Thomas Krichel wrote: >>>>>> >>>>>>> Adrian Wood writes >>>>>>> >>>>>>>> Just to mention that my attempts to access the author page are >>>>>>>> generating the following response from Internet Explorer. >>>>>>>> >>>>>>>> There is a problem with this website's security certificate. >>>>>>>> >>>>>>>> >>>>>>> Thank you for reporting this. >>>>>>> I don't see this with opera or firefox, but I trust we will >>>>>>> investigate. >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> Cheers, >>>>>>> >>>>>>> Thomas Krichel http://openlib.org/home/krichel >>>>>>> skype:thomaskrichel >>>>>>> >>>>>>> _______________________________________________ >>>>>>> RAS-run mailing list >>>>>>> RAS-run(a)lists.openlib.org >>>>>>> http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run >>>>>>> >>>>>> Christian Zimmermann FIGUGEGL! >>>>>> Economic Research >>>>>> Federal Reserve Bank of St. Louis >>>>>> P.O. Box 442 >>>>>> St. Louis MO 63166-0442 USA >>>>>> http://ideas.repec.org/zimm/ >>>>> >>>>> >>>>> -- >>>>> Adrian Wood >>>>> Professor Emeritus of International Development >>>>> University of Oxford >>>>> Queen Elizabeth House >>>>> Mansfield Road, Oxford OX1 3TB >>>>> >>> -- >>> Adrian Wood >>> Professor Emeritus of International Development >>> University of Oxford >>> Queen Elizabeth House >>> Mansfield Road, Oxford OX1 3TB >>> > > -- > Adrian Wood > Professor Emeritus of International Development > University of Oxford > Queen Elizabeth House > Mansfield Road, Oxford OX1 3TB >

1 0

Re: [RAS] Security alerts on your author webpage
by Dan Hayes 04 Sep '13

04 Sep '13

That's the problem. http://en.wikipedia.org/wiki/Server_Name_Indication ------- Browsers with support for TLS server name indication[6]: Internet Explorer 7 or later, on Windows Vista or higher. Does not work on Windows XP, even Internet Explorer 8 (because the support of this feature is not browser version dependent, it depends on SChannel system component which introduced the support of TLS SNI extension, starting from Windows Vista, not XP).[7] On Wed, Sep 4, 2013 at 12:59 PM, Adrian Wood <adrian.wood(a)qeh.ox.ac.uk> wrote: > It's Windows XP Professional version 2002 service pack 3. > > > On 04/09/2013 14:54, Dan Hayes wrote: >> >> What operating system (and versions) are you using? >> >> On Wed, Sep 4, 2013 at 2:34 AM, Adrian Wood <adrian.wood(a)qeh.ox.ac.uk> >> wrote: >>> >>> Thanks for your message. I'm using IE 8, not 6. Adrian >>> >>> >>> >>> On 02/09/2013 19:16, 'Christian Zimmermann' wrote: >>>> >>>> We had one other user reporting a similar problem a few weeks ago. We >>>> think this may be due to Internet Explorer 6 that is not handling >>>> properly >>>> wildcard security certificates. Are you using IE6? If not, could you >>>> give me >>>> more details? >>>> >>>> On Mon, 2 Sep 2013, Thomas Krichel wrote: >>>> >>>>> Adrian Wood writes >>>>> >>>>>> Just to mention that my attempts to access the author page are >>>>>> generating the following response from Internet Explorer. >>>>>> >>>>>> There is a problem with this website's security certificate. >>>>>> >>>>>> >>>>> Thank you for reporting this. >>>>> I don't see this with opera or firefox, but I trust we will >>>>> investigate. >>>>> >>>>> -- >>>>> >>>>> Cheers, >>>>> >>>>> Thomas Krichel http://openlib.org/home/krichel >>>>> skype:thomaskrichel >>>>> >>>>> _______________________________________________ >>>>> RAS-run mailing list >>>>> RAS-run(a)lists.openlib.org >>>>> http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run >>>>> >>>> Christian Zimmermann FIGUGEGL! >>>> Economic Research >>>> Federal Reserve Bank of St. Louis >>>> P.O. Box 442 >>>> St. Louis MO 63166-0442 USA >>>> http://ideas.repec.org/zimm/ >>> >>> >>> -- >>> Adrian Wood >>> Professor Emeritus of International Development >>> University of Oxford >>> Queen Elizabeth House >>> Mansfield Road, Oxford OX1 3TB >>> > > -- > Adrian Wood > Professor Emeritus of International Development > University of Oxford > Queen Elizabeth House > Mansfield Road, Oxford OX1 3TB >

1 0

Re: [RAS] Security alerts on your author webpage
by Dan Hayes 04 Sep '13

04 Sep '13

What operating system (and versions) are you using? On Wed, Sep 4, 2013 at 2:34 AM, Adrian Wood <adrian.wood(a)qeh.ox.ac.uk> wrote: > Thanks for your message. I'm using IE 8, not 6. Adrian > > > > On 02/09/2013 19:16, 'Christian Zimmermann' wrote: >> >> We had one other user reporting a similar problem a few weeks ago. We >> think this may be due to Internet Explorer 6 that is not handling properly >> wildcard security certificates. Are you using IE6? If not, could you give me >> more details? >> >> On Mon, 2 Sep 2013, Thomas Krichel wrote: >> >>> Adrian Wood writes >>> >>>> Just to mention that my attempts to access the author page are >>>> generating the following response from Internet Explorer. >>>> >>>> There is a problem with this website's security certificate. >>>> >>>> >>> >>> Thank you for reporting this. >>> I don't see this with opera or firefox, but I trust we will >>> investigate. >>> >>> -- >>> >>> Cheers, >>> >>> Thomas Krichel http://openlib.org/home/krichel >>> skype:thomaskrichel >>> >>> _______________________________________________ >>> RAS-run mailing list >>> RAS-run(a)lists.openlib.org >>> http://lists.openlib.org/cgi-bin/mailman/listinfo/ras-run >>> >> >> Christian Zimmermann FIGUGEGL! >> Economic Research >> Federal Reserve Bank of St. Louis >> P.O. Box 442 >> St. Louis MO 63166-0442 USA >> http://ideas.repec.org/zimm/ > > > -- > Adrian Wood > Professor Emeritus of International Development > University of Oxford > Queen Elizabeth House > Mansfield Road, Oxford OX1 3TB >

1 0

Re: [RAS] Security alerts on your author webpage
by Thomas Krichel 02 Sep '13

02 Sep '13

Adrian Wood writes > Just to mention that my attempts to access the author page are generating the following response from Internet Explorer. > > There is a problem with this website's security certificate. > > Thank you for reporting this. I don't see this with opera or firefox, but I trust we will investigate. -- Cheers, Thomas Krichel http://openlib.org/home/krichel skype:thomaskrichel

2 1

Re: [RAS] citation events
by Thomas Krichel 28 Aug '13

28 Aug '13

Jose Manuel Barrueco writes > > Hi Thomas, > > The sync RAS->CitEc used to be from sopri getting data from nebka: > > In sopri we had: > > rsync -t --log-format=%n aras@nebka.openlib.org:citec-export/* > /home/adnetec/ras-exports/ | ~/Ivan/handle_ras_exports.pl > /home/adnetec/ras-exports/ > > Now this is not working. No sure when it failed. When they changed machines recently I susptec.t > The estrange think > is that files in: > > adnetec@shuli:ras-exports > > are being updated. But I don't see any cronjob in shuli that rsync > such data, so, it should be put there from somewhere ... The problem > is that we need to execute the rsyn from shuli as previously, not > from the machine where ras lives... Well, we are at the merci of the Fed's access policise. Cheers, Thomas Krichel http://openlib.org/home/krichel skype:thomaskrichel

1 0

Re: [RAS] ISNI data from RePEc
by Thomas Krichel 08 May '13

08 May '13

Gatenby,Janifer writes > I will be back in Leiden next week and will look at your data then. We > have received the data on the FTP site. > > I have attached again the document that explains the ISNI request schema > and gives properties and notes for each element. Please let me know > specific problems and I will provide clarification. I have also > attached one of our test records. > > That said, we are happy to have the data in the tab delimited format as > well. I think it would probably better to switch to the XML data as it would be easier to debug. I could give you one file per record. Thi > Once I have looked at the data, would you be available for a phone call > later next week about test loading and access? Sure good to talk but I am not sure I can get much progress done beyond what I have submitted right now. I got a copy of the British National Bibliography. It is on my radar for inclusion into AuthorClaim. Cheers, Thomas Krichel http://openlib.org/home/krichel http://authorprofile.org/pkr1 skype: thomaskrichel

1 0